Aluminum Beams & Clamps for RCC Beam Formwork
 for RCC Beam Formwork – Aluminum Beams & Clamps | Tejus Centering India
Tejus Aluminum Beams are the ideal solution for RCC beam and slab formwork, offering unmatched strength, versatility, and ease of use. Manufactured from high-grade structural aluminum alloy, these beams provide superior strength-to-weight ratio compared to traditional MS beams, square tubes, or H-20 beams.
The integrated T-bolt slot allows for fast and accurate alignment during erection, reducing labour time and enhancing on-site efficiency. A wood insert channel allows easy nailing or screwing of plywood decking, making the beams compatible with a wide range of shuttering applications.
Lightweight, rust-free, and reusable over many cycles, Tejus aluminum beams are economical, safe, and highly efficient. When paired with precision-engineered beam clamps, they ensure firm support and alignment for high-performance RCC formwork systems.
Advantages of Aluminum Beam & Formwork System
- Improved Productivity – Lightweight design enables faster installation and dismantling, speeding up site workflows.
- Environmental Protection & Energy Saving – Reusable aluminum components reduce timber use and overall site waste.
- Minimum Labor Required – Simple locking mechanisms and easy handling reduce manpower needs.
- Reduced Construction Cycle Time – Efficient system design cuts down slab and beam formwork time significantly.
- Highly Versatile – Compatible with various shuttering layouts, including RCC beams, slabs, and corewalls.
- Less Wastage of Plywood – Precision-fit assembly ensures minimal cutting and material loss.
- High Resale / Scrap Value – Aluminum retains great value post-use, offering strong returns on investment.
 Beams of Aluminum for RCC Beam & Slab Shuttering | Tejus Centering
Use Tejus aluminum beams for RCC beam/slab shuttering with props, clamps, tripods & U-heads. Lightweight, strong & compatible with standard shoring systems.
Adjustable Props
Size : 2+2/2+3
Weight : 18/21 kg
Swivel Coupler
Used for bracing of Props using pipes for heights more than 3m
Weight : 0.8 kg
Forway Head
Used to support at the junction of Beams
AL 120 Beam
Area : 9.20 cm2
Weight : 2.45 kg/m2
Tripod
Used for support of props
Weight : 11.0 kg
U Head
Used for locking of Beams and also Props / U head
Beam Clamp
Used for clamping Beam side panels
AL 140 Beam
Area : 12.90 cm
Weight :3.483 kg/m
Spacing Guidelines for 140 H-Beam Slab Formwork
Recommended Joist, Ledger, and Prop Spacing Based on Slab Thickness & Load
| SLAB THICKNESS (mm) | IMPOSED LOAD (Kpa) | JOIST SPACING (mm) | LEDGER SPACING (mm) | PROPS SPACING (mm) |
|---|---|---|---|---|
| 100 | 947 | 610 | 2000 | 2400 |
| 150 | 11.15 | 488 | 2000 | 1350 |
| 180 | 12.16 | 488 | 2000 | 1300 |
| 200 | 12.83 | 488 | 2000 | 1250 |
| 250 | 14.51 | 488 | 2000 | 1200 |
| 280 | 15.52 | 488 | 1800 | 1150 |
| 300 | 16.19 | 406 | 1800 | 1100 |
| 350 | 17.87 | 406 | 1800 | 1000 |
| 400 | 19.55 | 406 | 1600 | 1000 |
- Imposed Load is 1.4 DL + 1.7 LL, where LL is 50 Psf + 25 Psf Impact load
- The suggested ledger and props spacing may vary depending on the length of Josit and floor height
- Floor height considered in this analysis is 3.6 meters and length of Joist is 3.9 to 4.5 meters
Aluminum Beams & Clamps for RCC Beam Formwork Image Gallery
RCC Beam casting using Aluminum i Beam
Assembly of Shuttering of RCC Beam using Beam Clamps & Aluminum Neams
Transversel Section
Slab Decking – RCC
 Slab (RCC) casting using Aluminum I Beams
